The correct use of plastic film blowing machine
Release time：
2019-04-16
1. Check that the temperature control is in good condition and the heating appliance is in good condition. Pay attention to timely adjusting the heating temperature of each point of the plastic film blowing machine within the index range.
Two, check the traction speed, control the film thickness.
Three, check the air storage cylinder pressure of the plastic film blowing machine, can not be too high, but there should be standby pressure.
Four, check the film blowing machine deceleration box and air compressor cylinder lubricating oil lubrication.
Five, check whether the raw materials have impurities, especially should be timely with magnets to check the iron mixed.
6. Observe and adjust the uniform thickness of the film, and the folding diameter meets the standard.
7. Check and control the ratio of raw materials and mix evenly.
8. Check the temperature rise and mechanical transmission of each running motor of the plastic film blowing machine regularly.
Previous
Next
Previous
Next
Related News
Contact Us
-
Tel：+86-760-22630699
E-mail：1741358602@qq.com
Add：West of Tong'an Industrial Zone Avenue, Dongfeng Town, Zhongshan City, Guangdong Province
Follow Us
©2022 Zhongshan Yueyang Plastic Machinery Co., Ltd SEO