Bag maker: What is the cutting system of the bag maker composed of?

Release time：

2021-05-07

undefined

The cutting system of bag making machine is composed of cutting knife, length regulator, overrunning clutch, welding line adjustment and so on.

1. Cutting knife: It is an important part of the cutting system of bag making machine. It is a floating mechanism with moving knife and sliding guide, which is pressed by the spring.

2. Bag-making length regulator: the bag-making length is adjusted by changing the position of the connecting rod set on the eccentric drag plate to control the bag-making length, and the bag-making size is adjusted by tightening the handwheel and nut.

3, Beyond the clutch: beyond the clutch is an important part of the bag-making machine, its quality and performance directly affect the product length error, but in the process of use, because of the high working frequency, so its life also has a certain limit, if found in the production process of bag-making length error (generally after half a year of continuous production), and eliminate other faults still cannot be solved, Disassembled clutch inspection and maintenance.

4, the welding line and the cutting line distance adjustment: the welding line and the cutting line distance is generally 5-10mm, turn the adjusting frame of the handwheel, so that the beam roller rise or fall a certain distance, to get the ideal cutting line, in order to facilitate the observation of the quality of the welding line, can be the single bottom line welding line position to the machine cutter, if the welding line and the bottom line are not parallel, The fastening screw of one bevel gear can be loosened, and the hand wheel can be turned to raise or lower one end of the beam roller. After stable production, the screw of the gear is locked.

5. Welding knife adjustment method: pad a piece of tissue paper on the supporting seat, rotate the big hand wheel in the body box to make the welding knife at the bottom dead point, loosen the nut and adjust the nut, and try to pull the compression degree at both ends of the tissue paper by hand until it is about equal. After adjustment, lock the nut to prevent loosening.

6. Automatic light-controlled feeding device: This device is composed of servo motor, feeding roller, light-controlled film mask, curtain, photoelectric tracking machine and electric control line. Its function is to maintain normal film feeding during the production process.

Bag maker: What should we pay attention to when using the bag maker?

How to buy a good bag making machine equipment?

Bag maker: What should we pay attention to when using the bag maker?

How to buy a good bag making machine equipment?